Fire Alarm Detectors

Series 65 Optical Smoke Detector

Series 65 Optical Smoke Detector

The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector but has an...
£16.26
... more info
Series 65 Heat Detector A1R 55000-122APO

Series 65 Heat Detector A1R 55000-122APO

The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 12 heat detectors in the...
£13.40
... more info
Series 65 Diode Detector Base 45681-201APO (ADB)

Series 65 Diode Detector Base 45681-201APO (ADB)

The Series 65 Diode Base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a schottky diode on the "L1...
£2.78
... more info
XP95 Ionisation Smoke Detector

XP95 Ionisation Smoke Detector

The Apollo XP95 ionisation smoke detector is quick at detecting fast flaming fires. The detector has a self-extinguishing white polycarbonate case and is designed for use with the easy fit XP95...
£46.18
... more info
XP95 Optical Smoke Detector

XP95 Optical Smoke Detector

The XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance, and has unique features that benefit the installer and the end user. It is...
£33.90
... more info
XP95 Class A2S Heat Detector

XP95 Class A2S Heat Detector

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors,...
£33.73
... more info
XP95 Class CS Heat Detector

XP95 Class CS Heat Detector

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors,...
£34.24
... more info
XP95 Detector Base

XP95 Detector Base

All detectors in the Discovery range fit the Intelligent Mounting Base. The Mounting Base is a low insertion force base with stainless steel contacts for the detector terminals. Universal address...
£2.40
... more info
XP95 Isolating Detector Base

XP95 Isolating Detector Base

The Isolating Base senses and detects short-circuit faults on Discovery loops and spurs. Key Features: Up to 20 detectors or their equivalent load, may be installed between isolating bases High...
£11.68
... more info
XP95 Detector Sounder Base

XP95 Detector Sounder Base

The Apollo Addressable Detector Base with Integrated Sounder is suitable for the whole range of XP95 and Discovery detectors. This Detector Base is a low insertion force base with stainless steel...
£35.84
... more info
Alarmsense Heat Detector Class A1R 57ºC

Alarmsense Heat Detector Class A1R 57ºC

AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires, making installation quicker and less expensive. AlarmSense has been...
£11.38
... more info
Alarm Sense Smoke Detector

Alarm Sense Smoke Detector

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke penetration into the sensing chamber. AlarmSense is...
£13.84
... more info
Alarm Sense Detector Base 45681-244APO

Alarm Sense Detector Base 45681-244APO

AlarmSense detectors can only be mounted into the AlarmSense Base. The base is used for installing detectors that do not require an integral sounder or sounder visual indicator. Key Features: Detects...
£4.33
... more info
Alarm Sense Sounder Base

Alarm Sense Sounder Base

The AlarmSense Sounder Base can only be used with AlarmSense systems. It is fitted with electronic circuitry to monitor the presence of detectors and signals any unauthorised removal of detector...
£21.89
... more info
Alarm Sense Sounder Beacon Base

Alarm Sense Sounder Beacon Base

The AlarmSense Sounder Visual Indicator Base is designed to be used with AlarmSense systems only. It is supplied with a low or high volume setting and red or white caps are available for stand-alone...
£32.78
... more info
Your IP Address is: 35.175.200.4
Copyright © 2019 Fire Protection Services. Powered by Southern Web Media
Zen Cart